Frequently Asked Question

Can I use the WAN/Data port to connect a second phone?
Last Updated 2 years ago

Yes, you can use this port to connect a second phone to the network; however, you will need to place a PoE injector between the port and the second phone to power the second phone. Some other considerations:

If voice is being tagged by the phone then it might only tag the packets from the first phone. Try to change the data port to use the same tag as the voice VLAN - Not possible on 1.x phones so you must use the native Data VLAN. This has not been tested - you will need to test your own scenario.

Please Wait!

Please wait... it will take a second!